info@fengli-machinery.com

CNC air duct production line is a duct making line with the highest automation and highest efficiency in rectangular air duct production line machines.

  • قراءة المزيد نظرة سريعة
    Auto Duct Production Line

    Auto Duct Production Line 2

    Full Auto Duct Coil Production Line 2 consists of material feeding frame, leveler grooving roller, hydraulic notching and shearing part. The electric is controlled by computer. This control system has loop feedback system, with higher manufacturing precision and stability. The maximum work speed is 16m/min. The length tolerance is ±0.5mm. The diagonal tolerance is ±0.8mm. Line 2 be not only be used for duct production but also for TDF (transverse duct snap flange system.)Combining with lock former machine,duct bender and TDF roll former , the duct manufacture auto line can produce high quality ducts ,also could be use for de-coiling .

  • قراءة المزيد نظرة سريعة
    Auto Duct Production Line

    Auto Duct Production Line 3

    Auto Duct Coil Production Line 3 is one of the most popular HVAC Auto duct line on the market. Its multi-functional performance can attend to the desire of different square duct fabrication. It can not only complete normal uncoiling, shearing, grooving, and bending, but also can be used through two different sets of Notcher moulds on both sides to complete the production of pre-TDF and Pre TDC ductwork in, from a 1.5mm thickness GI flat plate can be processed into L shape or mouth shape, also has model to suit 1250mm width and 1550mm material width feeding.

  • قراءة المزيد نظرة سريعة
    Auto Duct Production Line

    Auto Duct Production Line 4

    Full Auto Duct Coil Production Line 4 consists of coiler frames, leveling, grooving, hydraulic angle punching and notching, cutting, Pittsburgh lock former, feeding table, duplex TDF flange former and duplex angle-iron flange former. The whole line is CNC control. The loop feedback system assures high precision and nice stability. Comparing with full auto line V, line IV is cost-effective and occupies less space. It is suitable for TDF, TDC, angle-iron production while matched with one more hydraulic TDF folder. The maximum work speed is 16m/min. The diagonal line tolerance is ±0.5mm.

  • قراءة المزيد نظرة سريعة
    Auto Duct Production Line

    Auto Duct Production Line 5

    Auto Duct Coil Line 5 is one of the Flagship duct fabrication machines in the past few years, with a linear structure, production time can reach to compete 150mm L shape within 1min. This production line is easy to operate, has stable performance and has precise cutting. Fengli duct line 5 is mainly being used to complete the TDF flange/Right-angle flange former (For Angle-iron Flange) or Drive cleat (optional) under the process of Uncoiling, leveling, Grooving, Notching, Cutting, Pittsburgh lock forming, TDF flange forming, Angle-iron flange forming and Auto folding, all processes will be finished just by input the dimensions of the duct from the HMI panel. also has a different model to suit 1250mm width and 1550mm coil material width feeding and 1.2/1.5mm thickness ductwork.

  • Duct Fitting Laser Cutting Coil Line قراءة المزيد نظرة سريعة
    Auto Duct Production Line

    Duct Fitting Laser Cutting Coil Line

    Fengli HVAC Duct and Fitting Laser Cutting Coil Line including De-coiler rack, leveling device, laser machine table with automatic Disc rotating, output platform. Working principle: the coil material from the de-coiler is leveled by the leveling device and then enters the laser cutting table. After the cutting is completed, the leveling machine continuously feeds the material, and the automatic Disc rotating platform transports the cut parts to the output platform. After the leveling machine feeds, the system runs to cut the second drawing target, and the first target can be processed at the same time. So that the reciprocating work greatly improves the overall processing speed and efficiency.

  • قراءة المزيد نظرة سريعة
    Auto Duct Production Line

    U Shape Auto Duct Production Line 5

    U Shape Full Auto Duct Coil Production Line 5 is our latest auto duct line. With U type structure, it covers less space and reduce time of plate passing which achieves the productivity of each duct into twenty to twenty-three seconds. It’s mainly for TDF / angle steel / C-shaped flange forming with a daily processing capability of 1000-2500 square meters. Only with inputting dimensions in duct production line can automatically complete uncoiling, leveling, beading, punching, shearing, locking, forming TDF / angle steel / C-shaped flange, and folding.

Shopping Cart

Product Categories

Request A Quote